1 ds04-21703-3e fujitsu semiconductor data sheet assp piezo electric vco m2 series (d110) voltage controlled oscillator (4 to 30 mhz) n description the m2 series (d110) voltage controlled oscillators (vco) directly oscillate in the frequency range of 4 to 30 mhz. the m2 series vco use a piezoelectric single crystal with high electromechanical coupling coef?ient (litao3: lithium tantalate) for stable and wide variable frequency width. excellent s/n and jitter characteristic due to high q of lithium tantalate can realize high quality playback sound and picture, especially in pll circuit of digital audio and video equipments. n features wider variable frequency width than quarts crystals: 0.2% or more high stability (100 times more stable than lc or ttl-ic vco) excellent s/n and jitter characteristic due to high q of lithium tantalate for high quality playback sound and picture. excellent temperature characteristic: ?00 ~ 500 ppm (?0 ~ +70 c) 10-pin sip ready for high-density mounting. n package
2 m2 series (d110) n terminal assignment n maximum ratings n recommended operating conditions n standard frequencies item symbol rated value unit power supply voltage v cc ?.5 ~ +7.0 v input control voltage v in ?.5 ~ +10.0 power consumption p d 100 mw operating temperature ta ?0 ~ +70 c storage temperature tstg ?0 ~ +100 oscillation frequency range 4 ~ 30 mhz item symbol rated value unit power supply voltage v cc 4.75 ~ 5.25 v input control voltage v in 0 ~ 5 operating temperature ta ?0 ~ +60 c frequencies uses part number frequencies uses part number 12.288 mhz audio far-m2sc-12m288-d110 17.734 mhz video far-m2sc-17m734-d110 13.500 mhz video far-m2sc-13m500-d110 22.579 mhz audio FAR-M2SC-22M579-D110 14.318 mhz video far-m2sc-14m318-d110 24.576 mhz audio far-m2sc-24m576-d110 16.934 mhz audio far-m2sc-16m934-d110 28.636 mhz video far-m2sc-28m636-d110 note: the gnd terminals are not connected inside the module. be sure to route them on the pc board. terminal no. terminal name description 1v in control voltage input terminal 2, 3, 4, 5, 6, 7 a-gnd analog grounding terminal 8v out output terminal 9v cc power supply terminal 10 d-gnd digital grounding terminal (front view) 10 9 8 7 6 5 4 3 2 1 d-gnd v cc v out a-gnd a-gnd a-gnd a-gnd a-gnd a-gnd v in
3 m2 series (d110) n electrical characteristics (v cc = 5.0 v) *1: v cc = 5.0 v standard *2: 25 c standard, ta = ?0 ~ +70 c n measuring circuit diagram item symbol condition rated value unit minimum standard maximum power supply current i cc not loaded 10 15 ma oscillation frequency f h v in = 5.0 v +2000 ppm f 1 v in = 0 v ?000 output voltage h level v oh v in = 2.5 v v cc ?0.5 5.0 v l level v ol v in = 2.5 v 0 0.5 frequency voltage stability d f (v cc )v cc = 4.75 ~ 5.25 v ?00 +100 ppm *1 frequency temperature stability d f (ta) v in = 2.5 v ?00 +500 *2 1 3 4 5 6 7 9 10 8 v cc v in into oscilloscope including probe capacity (22 pf) gnd 2
4 m2 series (d110) n standard characteristics part number : far-m2sc-14m318-d110 1. control voltage and oscillation frequency 2. temperature characteristics (25 c standard) 3. power supply voltage characteristics (v cc = 5.0 v standard) (14.318 mhz) oscillation frequency change (ppm) 5,000 4,000 3,000 2,000 1,000 0 ?,000 ?,000 ?,000 ?,000 ?,000 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 5.0 control voltage (v) oscillation frequency change (ppm) 800 700 600 500 400 300 200 100 0 ?00 ?00 ?00 ?00 ?00 temperature ( c ) 40 30 20 100 102030405060 708090 v in = 2.5 v (14.318 mhz) oscillation frequency change (ppm) 2,000 1,500 1,000 500 0 ?00 ?,000 ?,500 ?,000 power supply voltage (v) 4.50 4.75 5.00 5.25 5.50 v in = 2.5 v (14.318 mhz)
5 m2 series (d110) n part number system n marking n dimension [part number example] far-m2sc ? 1 2 frequency designation : nominal frequency in six alphanumeric characters. m indicates the decimal point in mhz. (example) 14.318 mhz 14m318 serial no. : 110 ~ 119 (standard : 110) 1 2 110 f v-12m288 d110 nominal frequency no.1 pin indication lot (0.039) 1 (0.394) 10 f v-12m288 d110 0.3 (0.012) sealed side 7.0max (0.276) 3.4 0.3 (0.134 0.012) 20.0max (0.787) 28.0max (1.102) 0.5 (0.020) 22.86 (0.900) (2.54x9) (0.100x9) 2.54 (0.100) unit : mm (inch)
24 fujitsu limited for further information please contact: japan fujitsu limited corporate global business support division electronic devices kawasaki plant, 4-1-1, kamikodanaka nakahara-ku, kawasaki-shi kanagawa 211-88, japan tel: (044) 754-3763 fax: (044) 754-3329 north and south america fujitsu microelectronics, inc. semiconductor division 3545 north first street san jose, ca 95134-1804, u.s.a. tel: (408) 922-9000 fax: (408) 432-9044/9045 europe fujitsu mikroelektronik gmbh am siebenstein 6-10 63303 dreieich-buchschlag germany tel: (06103) 690-0 fax: (06103) 690-122 asia paci? fujitsu microelectronics asia pte. limited #05-08, 151 lorong chuan new tech park singapore 556741 tel: (65) 281-0770 fax: (65) 281-0220 f9703 ? fujitsu limited printed in japan all rights reserved. the contents of this document are subject to change without notice. customers are advised to consult with fujitsu sales representatives before ordering. the information and circuit diagrams in this document presented as examples of semiconductor device applications, and are not intended to be incorporated in devices for actual use. also, fujitsu is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. fujitsu semiconductor devices are intended for use in standard applications (computers, office automation and other office equipment, industrial, communications, and measurement equipment, personal or household devices, etc.). caution: customers considering the use of our products in special applications where failure or abnormal operation may directly affect human lives or cause physical injury or property damage, or where extremely high levels of reliability are demanded (such as aerospace systems, atomic energy controls, sea floor repeaters, vehicle operating controls, medical devices for life support, etc.) are requested to consult with fujitsu sales representatives before such use. the company will not be responsible for damages arising from such use without prior approval. any semiconductor devices have inherently a certain rate of failure. you must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. if any products described in this document represent goods or technologies subject to certain restrictions on export under the foreign exchange and foreign trade control law of japan, the prior authorization by japanese government should be required for export of those products from japan.
|
